Vacuum pump suction, vacuum suction, the causes of deficiency of vacuum pump suction

The emergence of the vacuum pump created a lot of convenience for people's life, so very popular. No matter what brand of vacuum pump used in after a period of all need to do some routine maintenance and cleaning, can not only prolong the service life of vacuum pump, improve the vacuum pump work good work environment. So in the process of using vacuum pump can appear sometimes shortage of vacuum suction, what is the cause of this phenomenon?

1, vacuum water pump overload, electrical burn. Motor bearing damage, the pump head stuck, motor coil burned, pump head of the shaft and motor shaft coupling with tight

2 smoking, vacuum pump, fuel injection.

3, vacuum pump exhaust filter failure degree is insufficient. Blade wear or blade to throw out, too little gas leakage, vacuum pump oil seal aging, pipeline leakage or air inlet block

4, vacuum pump have different ring. Leaf damage, bearing damage, grinding, the motor end cover and rotor bearing damage

5, high temperature vacuum pump. Oil has been blocked oil formation, bearing damage, rotor and end cover wear and fracture, and blockage of the heat pipe cooling fan

6, vacuum pump oil. Seal aging, exhaust filter aging failure

7, pipeline leakage. Sometimes pipeline leak phenomenon for a different reason, then we need to find a professional person to rule out checks, see whether it is for this reason, if it is, then hurriedly to repair welding, so as not to cause more leaks.

8, may also be within the pump leakage, which means the pump itself in addition to the problem, we should find out which part is missing, then welding bare.

9, high vacuum pump water supply temperature. Use the pump for a long time, continuous operation, the device itself is easy to appear this phenomenon. This time we need emergency stop, let the equipment rest for a few minutes, to be cooling.

10, vacuum pressure and vacuum pump is the same. The size of the different just flow. If power is not enough, the easiest way is to change the chuck.

11, if leakage is larger when the adsorption, should by increasing the vacuum water pump discharge; If insufficient should increase the adsorption area; If the area is large, the adsorption sheet deformation, should be more adsorption.

there are many causes of the lack of vacuum pump suction, but no matter what kind of, have a solution, so we should grasp the knowledge more at ordinary times. A better way is that we should check equipment regularly, in order to find problems in time, timely solution. Vacuum pressure and vacuum pump is the same. The size of the different just flow. If power is not enough, the easiest way is to change the chuck. If air leakage is larger when the adsorption, should by increasing the vacuum pump discharge; If insufficient should increase the adsorption area; If the area is large, the adsorption sheet deformation, should be more adsorption.

Using our JT to differentiate our content, services and consumer products, we seek to develop the most creative, innovative and profitable entertainment experiences and related products in the world.
The 21st century is sure to bring more innovation, new services and newer technology, thus new products and services to sell. J&T INDUSTRY CO.,LTD. will continue to shape and lead the markets in which it chooses to compete.
The above are only part of the examples regarding submersible pump, for more information, please click here J&T INDUSTRY.
As the manufacturing procedure of submersible pump becomes more regulated, the costs to businesses will increase and the workforce will suffer as a result.