Vacuum pump in the factory the processing method, vacuum pump corrosion and scaling

along with society's progress and common development, and from all walks of life to water conservancy engineering equipment used in pump technology also unceasingly to enhance. Vacuum pump is one of the pumps that are used frequently, equipment, but it was found that the device, there are many defects when using this technique. The factory according to your own vacuum pump vacuum pump maintenance experience, mainly aiming at the problems in the operation of the vacuum pump, and put forward related solutions ( Vacuum pump repair methods of dealing with the vacuum pump corrosion and scaling) Designed to relevant personnel provide use of reference and reference value.

if the vacuum pump severe fouling, may be stuck and cannot be used. If serious, will seriously affect the production schedule. For vacuum water pump fouling problem, we should understand the causes of fouling and take preventive measures.

vacuum pump manufacturer of vacuum pump corrosion and fouling, the damage and how to correctly handle will occur.

corrosion of vacuum pump generally divided into two kinds, one kind is the shape of a uniform corrosion, the other is a part of the corrosion, the former is uniform corrosion, which is a small part, such as pitting, crevice corrosion, intergranular corrosion, stress corrosion, etc. Use of polymer composite materials or spray paint on the surface of the vacuum pump spray anti-corrosion layer is one of the more effective anti-corrosion methods, its chemical function is the contact resistance and oil, and the cost is low. Compared with the traditional pressure vessel welding repair, with construction, low cost, strong security features, the characteristics of the corrective actions.

as the beginning of the scale and vacuum pump, vacuum water pump internal heat environment destroyed gradually, so the heat exchange frequency is more and more low, the scale is more and more fast. The cause of the scaling usually includes the following contents:

( 1) Heat decomposition: after into the vacuum pump, of 0201 water hardness as the rotation of the water pump in formation water ring in the pump body heat, to gradually decompose bicarbonate dissolved in the water and the precipitation insoluble substance in the water. Precipitation and scale.

( 2) Solubility decrease: solubility salts of negative temperature coefficient with the increase of water temperature cycle and lower solubility, so the sediment deposition to form scale.

( 3) Interactions: circulation high solubility of salt in the water in the vacuum pump during the work will be combined with other physical and salt, form insolubles, formation of scale.

( 4) Evaporation concentration. Continue to work with circulating water and heat, will inevitably produce evaporation and concentration, so the concentration of salt dissolved in water will continue to increase, and when saturated, can form scale deposits.

vacuum pump vacuum pump maintenance of corrosion and scaling processing

in the process of vacuum pump operation, because of the working liquid, calcium and magnesium hardness, pH value, conductivity, scaling factors such as temperature, may cause damage to equipment, specific as follows:

1. Increase the chemical consumption and pollution load.

2。 Production accident and reducing the life of equipment.

3。 Increase the number of unplanned downtime, the time to make continuous production and affect the production capacity of equipment. Clean downtime, increase the maintenance cost and rated load.

4。 Increase the energy loss. The traditional calibration methods including closing chemical cleaning, close the high-pressure water cleaning, adding scale inhibitors, manual mechanical cleaning, closing and replacement, etc. , but this is both time-consuming and laborious, and correction without ambition. For the above problems, it is suggested that the protection of the method is to use electronic scale remover.

J&T INDUSTRY CO.,LTD. specializes in undertaking corporate offers to cater the needs of different companies.
Visit J&T INDUSTRY CO.,LTD. in China for professional water pump tips and qulity ensured . The company is a licensed, bonded, and insured provider with decades of experience. Make your enquiry, today.
To find a qualified at reasonable price, contact J&T INDUSTRY CO.,LTD. at J&T INDUSTRY, a professional provider and tell them what you envision for your water pump.
J&T INDUSTRY CO.,LTD. expects to reach the desired profits in the first year and does not anticipate serious cash flow problems.
J&T INDUSTRY CO.,LTD. really created a whole persona around water pump’s manufacturing and selling, and it's so innovative that people really respond to it.