Titanium chemical pump life extension the details of the operation

titanium chemical pump life extension the details of the operation

1, let titanium chemical pump long time overload operation

in order to prevent the titanium chemical pump long time overload operation, don't smoke sediment concentration of water and the rules of investigating whether current value at any time on the nameplate, if discover the current is too large, should stop to see. Other, electric pump dehydration homework time shoulds not be too long, to prevent the motor overheating and burning.

2, abnormal voltage boot

due to the low voltage power line is longer, the end of the line voltage is too low is often the case, titanium chemical pump motor speed dropped, when amounted to less than 70% of the extra speed, start centrifugal switch would be closed, forming a round head time electricity and heat and even burn winding and capacitors. On the contrary, high voltage motor overheating and burning of winding. Therefore, titanium chemical pump in operation, the operator is necessary to survey the power voltage at any time, if below 10%, below the additional voltage is higher than the additional voltage more than 10%, should make the motor suspension operation, find out the reason and ruled out of order.

3, avoid frequent switch

don't frequently switch titanium chemical pump, this is because the electric pump stalling generates a return, if immediately switched on, can make the motor load, leading to a burn winding current is too large. Because when a current is large, frequently launch will burn out titanium chemical water pump motor windings.

titanium chemical water pump using note

1, titanium chemical pump when the choose and buy should pay attention to the model, the flow and head. If choose the standard is not appropriate, will not be able to get enough water yield, can't exert the power of the unit. Other, still should make clear direction of rotation of the motor, some types of titanium chemical pump is turned and rotation are available out of the water, but when rotary water yield and large current, its transfer back damage motor winding, in order to prevent the titanium chemical water pump on water leakage and cause accident getting an electric shock, should the leakage switch maintenance.

2, don't let the titanium chemical pump long time overload operation, don't smoke sediment concentration of water, electric pump dehydration homework time shoulds not be too long, to prevent the motor overheating and burning. Units in operation, the operator is necessary to investigate the operation voltage and current at any time whether values within the rules of nameplate, if do not conform to the motor should be brought to suspend the work, find out the reason and ruled out of order.