Titanium alloy pump installation errors of the solution

titanium alloy pump installation error concept and solution:

titanium alloy pump extruder screw the leakage, the central district, water yield paragraphs clamping couplet. Each level in a low speed than the titanium alloy pump impeller, a guide water leaves. Low speed than the titanium alloy pump radial force with hydroelectric power equilibrium method processing, radial force borne by rolling shaft bearing, grease RunHua with plants. Low speed than the titanium alloy pump water pump seal choose soft packing seal or machine.

column more than grade titanium alloy pump inlet channel bend more if in inlet channel bend, frictional resistance will add some water. And elbows should be in straight position bend, does not allow in the standard position bend, prevent combined with gas. Equipment inlet road level segment level or upwards it would make in the inlet gas, vacuum values drop water pipe and water pumps, the pump suction wet pump head drop, water flow reduction.

titanium alloy pump can transport liquid is relying on the high-speed operation of the impeller was the role of cohesion, so the full name is titanium alloy pump. Titanium alloy water pump in and out of the pipe line on the road in the note, great effect on all the normal operation of pump process, its role is to ensure that start to pump infusion liquid is not easy to go away by the suction tube, titanium mesh, can prevent the liquid pump in the pool is dirt into the pipeline blocking or pump shell formation.

pump structure is mainly composed of titanium alloy, bushings, stuffing box, packing, water seal, etc.

1, shaft sleeve, is used to protect the shaft, to prevent liquid corrosion of shaft and the shaft is not directly with packing friction.

3, stuffing box and packing: play the external and internal distance of pump casing, to reduce the leak amount.

the processing of titanium alloy water pump leak: operation process: to reduce the leak amount should first packing first installed in the right way.

( 1) Should first will be clean up clean stuffing box, and check whether the shaft sleeve and the outside appearance of the stuffing box shape, have without obvious wear.

( 2) Cutting edge to sharp when packing, cutting good packing in a necessary after in the stuffing box is a full circle, not shortage, not very long.

( 3) Mount a circle after packing, tighten gland packed and uniform, until packing admitted has been in place, loosen in titanium alloy pump gland, tighten again to the appropriate tension force.