The maintenance of water ring vacuum pump filter -

it is well known that filter is an important part of water ring vacuum pump. Associated with pump can give full play to their role as the filtering, and filtering element is wearing parts. If not found, will be damaged. must be carefully checked during work, and must not be a lack of regular maintenance work. Now, let's talk about the maintenance of the filter element.

water ring vacuum pump is equipped with eccentric rotor with fixed blades, the eccentric rotor (the water Liquid) Into the wall of the stator. Water ( Liquid) Formation and the fluid of the stator concentric rings. Liquid ring together with the rotor blade. Vacuum water pump variable volume of variable volume.

water ring vacuum pump ( Hereinafter referred to as water ring pump) Is a rough vacuum pump, can achieve the ultimate vacuum of 2000 ~ 4000 pa, equipped with vacuum pump vacuum unit can reach 1 ~ 600 pa. Water ring pump can be used as a compressor, also known as water ring compressor. This is a low pressure compressor, the pressure range is 1 ~ 2 x 10 ^ 5 Pa.

1, usually, before open the water ring vacuum pump, please check whether the parts is complete, and if there is any fault, in order to avoid problems in use and affects the work efficiency. After check all parts for filter, there is no problem. Can open the machine to view the drive current. If current is normal, it is very good, but if the current decline, is a good chance vacuum filter is blocked, which affects the operation of the current.

2, water ring vacuum pump filter should be regularly check to avoid failure of the whole equipment, and in use after a period of time, will be the best replacement. Can't say it will be used, it will be used. The impact of the machine will be very big, the damage will be large.

all in all, in the maintenance of water ring vacuum pump, it is important to check the filter element. If it is found that filter has wear or other problems, please first check the damage degree and replacement. Don't look at this is a small problem, if it has no effect on the operation of the pump, it will be ignored, so it is likely to develop into a big trouble in later stage, as a direct result of pump downtime.