- the main points of the rotary-vane vacuum pump repair and maintenance

rotary vane vacuum pump after use for maintenance should pay attention to? What is the main points of the daily maintenance? Today, rotary vane vacuum pump manufacturers will analyze the key points of maintenance and repair of vacuum pump.

1。 The use of the gas ballast valve basically has two, one is the relative humidity is higher, the other is the pumping gas containing vapor liquid.

2。 Ball valve installation is necessary, because if the ball valves installed between the voltage regulator and the water pump being measured, it will reduce the damage for voltage regulator and prolong service life.

3。 During the period of equipment operation, you must know to direction. If you do not know to the direction, you must get it by other methods. When the pump to open, with a positive suction, blowing air into reverse.

4。 The choice of the rotary-vane vacuum pump oil should also be in accordance with the requirements of model and choosing the right vacuum pump oil.

5。 There are a lot of fuel injection causes rotary-vane vacuum pump. Usually, there will be back to the oil or reverse fuel injection. In order to avoid this kind of situation, must first open water pump port, and then through the right are turned into oil storage disk into the fuel tank. Added to the correct oil level.

6。 After return to the new rotary vane vacuum pump, please first check the check box, to see if in the course of carriage damage the pump. Next, the pump is installed in accordance with the instructions, connect the power supply, then connect the water pump to water.

rotary-vane vacuum pump maintenance:

1. Clean the external cabinet. After power off, please at least a month to use soft dry cloth to wipe cabinet outside of the dust.

2。 Clean air inlet filter silencer, filter filter filter cotton cleaning is very important, it directly affects the service life of vacuum pump flow, at least once a month.

3。 In use process, tighten the base and fixed damping foot bolt, and place it in clean ventilated place as much as possible.

4。 Using a vacuum pump, do not touch any component on the machine.

5。 This product is oil-free vacuum pump. It is forbidden to lubrication.

6。 The product is not used for a long time, please clean and put in dry and ventilated place.

more information organization and Shared by rotary vane vacuum pump manufacturers. Our company specializing in the production of oil-free vacuum pump, water ring vacuum pumps, rotary vane vacuum water pump, screw vacuum pump, vacuum pump system and other products.

The global market was valued at winter cover pump in pool cover drain pump and is expected to reach a market value of winter cover pump by pool cover drain pump, with a CAGR of winter cover pump during the forecast period.
J&T INDUSTRY CO.,LTD. didn’t receive any negative feedback from our customers before, which proves that customers have faith in us.
The success of water pump of campaigns largely rides on how you market your company to the crowd.
In conjunction with retraining and upskilling efforts, J&T INDUSTRY CO.,LTD.’s workers should focus on growing unique human skills that high-tech machines are unable to replicate, such as strategic and abstract thinking, complex communications, creativity and leadership competencies.