The daily maintenance of horizontal acid proof pump project

Horizontal acid pump in daily use process should pay attention to maintain good parts, used to make the life span of the equipment is not likely to happen malfunction phenomenon and acid proof pump maintenance should do the following:

1, should often wipe the horizontal acid pump unit and the path of the acid pump pipe surface liquid and dust or other dirt, keep acid proof pump clean.

2, should also be replaced periodically horizontal acid proof pump bearing grease inside, for example, all the horizontal acid proof pump products are normally equipped with sliding bearing, all equipped with sliding bearing of the centrifugal pump in the use of the product after 100 hours, should be to change, the lubricating oil 300 - after each run After 500 hours in a rolling bearing lubricants.

3, if it is packing seal of single-stage single-suction centrifugal pump products to check and adjust the firmness of the packing.

4, check and tighten loose bolt and nut.

5, often clean up the inside of the tank suspension, let the horizontal acid proof water pump into the sink, to prevent debris blocked the inlet pipe and is sucked into the pump to broke after impeller or blockage inside the pump body.

horizontal acid proof pump is very important for the daily maintenance, if acid proof pump maintenance work was not well done, a new acid proof pump is likely to just use it didn't take long to appear all kinds of failure phenomenon.

This is an global standard which acts as a form of promise that J&T INDUSTRY CO.,LTD. manufatures according to the finest quality standards.
The expert engineers of J&T INDUSTRY CO.,LTD. always develop with utmost precision so that all quality standards are met during the production. we are looking forward to becoming a trusted supplier of customers. visit us at J&T INDUSTRY.
J&T INDUSTRY CO.,LTD. affords you a suitable low price for proving our ethical considerations.