Rotary vane vacuum pump used in the industries of manipulator _

rotary vane vacuum pump application in the industrial robot using the vacuum pump, vacuum cleaning process and the working principle of adsorption. It is not only used for packaging machine, injection molding machine, machine tools, etc. , are also used in the automotive industry, automatic control, printing machinery, packaging machinery, etc. Water purification treatment, analytical instruments, equipment maintenance, bio-pharmaceutical, communications electronics is pure green industrialized society need the choice of the vacuum of space. Robots can simulate some movement of the hands, and can perform the desired task under a certain control program. It can replace human workload or a health hazard, realize the production automation and mechanization.

then, we will introduce information of rotary vane vacuum pump.

rotary vane vacuum pump installation instructions

1. The vacuum pump as much as possible in a well ventilated, low dust, low humidity. The base fixed with rubber shock absorber or spring.

2。 Connect the air inlet to some specifications of the joints and air filter silencer, connecting pipe; Remove the outlet or silencer.

3。 The power supply should have enough capacity to confirm the voltage conform to product requirements.

4。 Connect the power cord and capacitor line according to the wiring requirement.

5。 After check no abnormal vacuum pump assembly, insert the power cord conforms to the requirements of the power supply socket ( Power socket must be good grounding) , the machine began to work.

6。 Adjust the pressure regulator, pressure gauge shows the required pressure and stability.

7。 The vacuum pump is not used, regulate the regulator to empty air, and then cut off power supply.

8。 It is forbidden to randomly pull wire, in order to avoid damage or product failure.

the maintenance of rotary vane vacuum pumps and maintaining

1. Clean the shell. In the case of cut off power supply, please use soft dry cloth to clean the outer shell of dust and dirt, and at least clean once a month.

2。 Clean air filter muffler, muffler filter cotton cleaning is very important, it directly affect the vacuum water pump flow rate and life expectancy, at least once a month, please unscrew muffler, remove the muffler end cover, remove the filter cotton, rinse off with clear water, and then install. If you can't clean, please replace the filter.

3。 Use, tighten the base and fixed damping foot bolt, and put them in a well ventilated place.

4。 Using a vacuum water pump, it is forbidden to contact on any of the components of machine.

5。 This product is a robotic vacuum pump, lubrication is forbidden.

6。 Product when not in use for a long time, please clean it and put in dry and ventilated place.

Germany rotary vane vacuum water pump note

1. Correct selection of power supply to match the product nameplate and capacitor. When the power supply voltage is beyond the scope to use or voltage fluctuation is bigger, before use, please use the voltage stabilizer.

2。 This product USES the environmental temperature for - 10 to 40 ° C +, height is not more than 1500 meters above sea level. More than 1500 meters using plateau type vacuum pump. When using, please clean as far as possible to place it in ventilated place.

3。 With the right air filter silencer, regular cleaning or replacement.

4。 This product USES is the medium of air. If you need other media, please contact the dongguan vacuum technology co. , LTD.

5。 To extend the power cord, please consider voltage drop.

with the development of science and technology, industrial automation degree enhances unceasingly. In some ways, automatic and semi-automatic equipment is used for auxiliary operation, which makes workers from hard work. Among them, the rotary vane vacuum pump in the robot industry application is simple to operate, high efficient, safe, accurate and intuitive features, can satisfy the modern enterprise efficient, high quality, high safety requirements. It plays an irreplaceable role.

The water pump approach to winter cover pump is becoming increasingly popular; consequently, there is a surge in the demand for .
is a pool cover drain pump water pump provided by J&T INDUSTRY CO.,LTD. which is a leading manufacturer in China. For more information, visit J&T INDUSTRY.
The first machine to produce winter cover pump, the pool cover drain pump water pump was invented in winter cover pump in pool cover drain pump by winter cover pump and was subsequently improved.