Pump industry suppliers - Titanium axial flow pump and guide vane mixed flow pump before starting to be rules

titanium axial-flow pump and a guide vane mixed-flow pump before starting to accord with the provisions of

1, should open the entrance gate.

2, need to fill in the letter of joint attention on cold water, RunHua rubber bearing, until the water pump normal water yield.

3, adjust pump should be reduce the blade Angle, all of them, and unto all water yield normal suitability adjustable to allow category.

4, generating set containing mechanical pump to start mechanical pump, discharged gas pump.

titanium to accord with the provisions of the axial flow pump commissioning

1, machine sealing leak amount shall not exceed 5 ml/h, packing seal leak amount shall not exceed the following requirements, and the temperature should be normal;

2, motor rotor and the fitness components should be normal operation, there shall be no abnormal noise and friction condition;

3, each RunHua point grease temperature, the temperature of sealing liquid and cooling water shall be accordance with machinery and equipment technical documentation requirements; There shall be no leakage and the mist pump grease conditions;

4, titanium axial-flow pump shall not exceed 70 ℃, the temperature of the rolling bearing roller bearing shall not exceed 80 ℃, the temperature of the rolling bearing temperature should be unique to machinery and equipment technical documentation requirements;

5, low-temperature pump in the throttle valve operation;

6, pump working conditions in the rating point for commissioning time not less than 2 h;

7, must be accurate measurement of rolling bearing vibration value of pump body, should be accurate measurement under the standard of operation without cavitation, vibration transport rate have effect value measurement according to this standard annex 2.

8, with harmful, harm, flammable, flammable and explosive, particulate substances such as to carry out the operation of the pump, the commissioning shall be accordance with machinery and equipment technical documentation requirements.

titanium lining fluoride axial-flow pump can be divided into what kind?

titanium axial flow pump in now has the main purpose of generally, also is because, in the selected types of cases, must pay attention to, in its application, generally speaking, it can be divided into pillar type water pump, lateral horizontal pump, pump, etc. , according to the different applications of the natural environment, in the selection of pump shell also need not the same as above.

in general, titanium axial flow above the installation is very convenient, if there were the pump shell, a water pipe cable, could be carried out because of the pump shell itself has its own weight, can fully automatic move down to the water, so you can literally work in the water, and this is it for convenient side, level is its ability to adapt again, and this is the way they need to note the pump shell, this case, in the selection of titanium under the condition of axial flow pump shell, you need to choose the pillar type pump.

Look at the trends, both economic and consumer, for indications on your J&T INDUSTRY CO.,LTD.'s staying power.
Many websites provide additional information on the topic of submersible pump. One such site worth visiting is J&T INDUSTRY.
For J&T INDUSTRY CO.,LTD. as a whole to adopt an attitude of acceptance toward change and technological innovation, we first have to truly embrace it and practice what they preach. Technological development needs to be more than just another investment, but a complete integration.
J&T INDUSTRY CO.,LTD. has been making a name for itself as a producer of some of the finest in the China, and it has been singing its praises for some time.
J&T INDUSTRY CO.,LTD. integrates research streams on team diversity and knowledge boundaries, and present a framework that considers the kinds of specific knowledge boundaries that must be spanned to achieve high-level, cross-boundary teaming.