Pump industry suppliers - In the operation of titanium alloy pump flow or water yield enough reason and solution

titanium alloy pump, that is, the material, machinery and equipment manufacturing, the use of titanium and titanium metal have the corrosion, scale is small, high compressive strength, high and low temperature test of physical properties of good comprehensive properties, the over-current components such as join point, impeller comprehensive sealing and filling material used titanium or titanium metal manufacturing, processing aspects of the packing seal shaft sleeve, filling material is easy to damage problem.

titanium alloy pump pump shell of titanium metal precision casting forming, no sand hole, ability strong acid alkali and strong erosion. Motor and the pump shell is a figure of coaxial output design, not only ensure the robustness of the motor, and has the feature of high speed water pump.

the type of titanium alloy pump

a corrosion resistant pump, was sent liquid phase refers to touch the parts made of titanium or titanium water pump. Chemical plant with titanium or titanium alloy pump centrifugal pump. Titanium and titanium alloy pump price is too expensive, generally only in other raw material corrosion resistant pump can not be under the conditions of use, very suitable for transportation of chlorine acid salt solution, can not transport fuming nitric acid, hydrochloric acid.

the principle of titanium alloy pump

gas molecular structure and rotation of electronics hit by weak electrolytes, gas ionization under the effect of electrostatic field, towards the anode, titanium plate, and negative produce fresh keep the titanium alloy titanium membrane water pump vacuum working ability.

the ionization accidentally the ability to work with the radio from the kinetic energy, quality and incident Angle is different and different, oblique than vertical negative effect better, to ensure that the ionization to get enough negative kinetic energy. Molecular structure of each faw body are weak electrolytes on the other hand, are released at least one electronic device, also came to the electronic device to rotate the electron cloud, they together with secondary electron compensation due to run on the anodic oxidation damage of electronic devices.

titanium alloy pump in operation may appear traffic is not enough or not because of the water yield and solution

1, not smooth or the impeller outlet road is blocked. Remove pipe and impeller clogs, often catch dirt in reservoir.

2, hydraulic discharge gate valve can not open, check the gate, and often to the gate to carry out the maintenance.

3, set of relative density is too large or too high viscosity liquid. For the sake of water transformation and improvement in many aspects.

4, several pumps, the output of the pipe is not installed this product or the product door sealing doesn't close tightly. Inspection result after modification or changing the product.

5, titanium pump installation height to width ratio is too high, prompting impeller in deep shortage, which reduces the water pump water flow; Manipulation of the pump installation design elevation of allowable error, can't literally expansion.