Pay attention to these points - when using the roots vacuum pump

roots vacuum pump in petroleum, chemical, plastic and steam turbine rotor dynamic balance plays an important role. For us, when we are using, we should get to know the working point of the roots vacuum pump equipment, to be able to run smoothly. So what is the working point of the roots vacuum pump equipment.

1, after reassembling, should carry on the trial run. In the process of cleaning, roots pump will be a certain amount of residual volatile oil hair content. Pump will be idle for 2 hours, the oil will replace twice. Normal after the operation, will once again put into normal operation.

2, when the new devices are pumping clean and dry gas, suggested that once every 100 hours to replace oil. Oil change period should be based on the actual conditions of use and whether it can meet the performance requirements and considering other things.

3, working after 2000 hours, should carry on the overhaul, monitor the aging of the rubber seal degree, check if the exhaust valve plate crack, clean up the deposition of dirt on the valve plate and the exhaust valve seat.

4, add bearing lubricant to the bearing body, observe the oil level should be in the middle of the oil standard, lubricating oil should be timely replacement or supplement.

5, be sure to check the oil quality. If it is found that the oil metamorphism, timely replacement of new oil. To ensure the normal work.

6, all indoor cleaning pump parts, such as rotor, rotor, spring, etc. In general, wash and dry with gasoline.

7, roots vacuum pump need to regularly check the oil level. If do not conform to the regulations, must be adjusted to conform to the requirements.

roots vacuum pump work is mainly composed of a pair of synchronous gears in the pump body through two rotating in the opposite direction of the rotor drive. The use of advanced technology accessories, greatly changed the noise, and is now popular new equipment.

only constant mechanical vacuum pump factory main products are 2 bv, V, VG, VI, VZ,. vn, LRP series water ring vacuum pump, X, GVD (gnu visual debugger) series rotary vane vacuum pump, what ZJ had roots vacuum pump series, GXS, DHS, VSD, GHS series screw vacuum pump, DZS series claw pump, the central vacuum system, etc. The company acting with atlas. Manufacturing ( 阿特拉斯) , times g speck products. Constant to mechanical and electrical vacuum pump manufacturer with many years of production experience, first-class technical staff, perfect after-sales channels to make the product quality stable and reliable for many years. Constant to mechanical and electrical manufacturers expect to cooperate with every colleague, more knowledge of vacuum pump please continue to pay attention to our constant mechanical and electrical equipment co. , LTD. Contact phone number - 400 8625533, mobile phone 13928410990.