Lime slurry pump energy saving and maintenance methods

how to maintenance of lime slurry pump

to ensure the normal operation of lime slurry pump, extending its using life. Users deal with lime slurry pump to the following maintenance:

1, the impeller conditioning: in order to ensure the pump operation, it is necessary to adjust the impeller with former guard board space, space conditioning impeller pump stopped, loosen bolts pressure bearing box and loosen adjusting nut and bearing components to move forward, at the same time with the hand scroll according to the rolling direction of the water pump shaft rotation, until the impeller and guard plate friction suspended, reoccupy adjustment bolt to make the rotor backwards, down around the mobile space, evenly distributed between the impeller front and rear guard board, reached between impeller and guard plate, plate after before clearing flat end and dispatch two dust-proof plate tightly, fastening on the shaft. Adjusted, before starting again from the beginning to check the impeller scroll is normal, the bearing components hold-down bolts are tight, then start pump.

2, bearing lubrication: lime slurry pump bearing components in the device, if the equipment is correct, oil amount, timely repair, transportation life spans will be longer, repair personnel should be punctual service bearing components, check the status of the bearing and lubricating oil, must be punctual increase or replace lubricating oil in the homework, time interval and the injection volume and the pump rotation speed, bearing specification, operation time, pump stop opening times in a row, the surrounding environment and the operation temperature and so on many factors, and therefore must be gradually accumulate experience, reasonable and timely add lubricating oil.

3, the protection of the shaft seal: the shaft seal packing sealing water pressure and water pump should be punctual detection, always keep a clean water along the axial flow, punctual gland, punctual check packing and replace the packing, shaft seal water pressure, shaft seal water shall comply with the above requirements.

lime slurry pump energy saving method: according to the practical requirements of flow and head to choose

general users while selecting a lime slurry pump, only pay attention to pump flow options, ignored the lift of pump selection, some people even think lift more work more safe, so the choice of lime slurry pump head should be greater than the head of practice needs, so that many waste of electricity. The lime slurry pump should be selected according to the practice of head needs to choose, in order to reduce the number of installed, saves the electricity. Other, need careful, when accounting head, needs to consider lose your head, to prevent the lime slurry pump lift is not enough, and affect the irrigation and drainage pump power.

J&T INDUSTRY CO.,LTD. has a great reputation on producing innovative products as the submersible pump.
J&T INDUSTRY CO.,LTD. has a wide variation of including pool cover drain pump, winter cover pump and pool cover drain pump, etc.
Choose the right platform for selling submersible pump and we'll reach the right customers. But if we have the right idea in the wrong platform, that still adds up to the wrong idea.
The same determination is critical for business owners. The journey in submersible pump business is both a challenging and rewarding experience.
Depending on the scale of the service, J&T INDUSTRY CO.,LTD. might also need to hire and manage an overseas workforce and comply with regulatory requirements.