For the maintenance of Y type oil pump assembly method

Y type oil pump, Y type oil pump repair method of Y type oil pump assembly method

oil pump is in good working condition is the important guarantee of complete daily incoming and outgoing oil. To do this, in addition to should do well in the daily maintenance and maintenance work, must also be carried out on the oil pump maintenance on a regular basis. Then need to tear open outfit in the process of preventive maintenance of all kinds of oil water pump products, here is the commonly used Y type oil pump assembly method for your reference:

1, the first to use a special tool to pack rolling bearing on the pump shaft, the shaft from coupling direction through the shaft bracket, fitted with ball bearing and lock nut.

2, put forward rear axle bearing cover and water retaining ring, and the screw fastening.

3, coupling.

4, fitted with mechanical seal gland, and mechanical seal.

5, mount pump body, symmetrical evenly tighten nut. Attention to loosen the top wire, make the top wire end indentation hole, to prevent bad brackets.

6, with the impeller and the impeller lock nut.

7, the entire water pump cover loaded on the water pump body, and tighten the screws evenly. Turn the coupling nut on the side while, flexible rotation, no sound of friction.

8, coupling correction.

9, symmetrical evenly tight mechanical seal gland nut.

10, connecting the liquid seal tube and accessory line.

Y type oil pump is the heat conduction oil pump series products, Y type oil pump structure is as follows:

related articles: what pump used tank

the maintenance method of Y type oil pump and assembly method of Y type oil pump pump self-priming pump original news articles by a professional.