Fluorine plastic submerged pump and fluorine plastic self-priming pump, fluorine plastic centrifugal pumps and submersible pump is analyzed

Fluorine plastic material is strong acid and alkali, corrosion resistance, made of fluorine plastic pump delivery effect can also be corrosion resistant, not only for chemical factory transportation acid, alkali and corrosive liquid pump is commonly used, there are many kinds of fluorine plastic pump, fluorine plastic submerged pump and fluorine plastic self-priming water pump, fluorine plastic centrifugal pumps and submersible pump have what different? Fluorine plastic submerged pump, fluorine plastic submerged pump solves the problems of low transmission. But due to the long axis, combined with the impeller unbalanced radial force, the shaft to the cantilever structure, thus turns on the impeller end caused great deflection. The longer the shaft, the bigger the deflection. In order to solve this problem, in the shaft bearings are installed. But as a result of the shaft for the flexible shaft, continuing unilateral bearing wear, the wear quantity is bigger, bearing violent shaking, wear faster, so the submerged pump damage frequency is higher. And shaft for too long, usually within 2 meters. Submerged pump bearing is depend on medium for cooling and lubrication of the pump. If not pumping medium for refrigeration and bearing lubrication ( This kind of situation in the empty pump and imported by the clutter jams occur) Tile burning occurs, even burning motor. While submerged pump repair installation is very troublesome. Especially when transport corrosive medium without lifting tools it is difficult to complete. Fluorine plastic centrifugal pump: fluorine plastic centrifugal pump in the transmission fluid, when the liquid level below, it is the water pump priming. Therefore when using low liquid should be installed in the pump inlet bottom valve, in order to ensure the water pump cavity filled with fluid, there will not be empty. Fluorine plastic self-priming pump, fluorine plastic principle of self-priming pump adopt unique patent impeller and separation plate of mandatory gas-liquid separation and completing the process of suction. Its appearance, size, weight, similar to pipeline pump efficiency. Vertical self-priming pump doesn't need bottom valve, vacuum valve, gas separator and other auxiliary equipment. Normal production start without irrigation fluid, strong self-priming capacity, can replace the current widespread use of submerged pump, Low liquid pump) , as a circulation pump, tank car pump, the suction water pump and motor pump. Submersible pumps: submersible pump are used for conveying water, river water, and used in acid and alkali corrosive liquid such as transmission cases are prone to motor corrosion, leakage phenomenon, is not very safe. were choked up with rubbish must pull the pump to clean up, is not very convenient, so in the chemical industry is seldom used in actual application.
In an age when water pump is increasingly important, the researchers believe manufacturers should pay close attention to their results.
To understand how efficiently works, go to J&T INDUSTRY for more information.
Obviously, financial return is important in manufacturing water pump, but I think that's not enough. I think many customers want to support something they really believe in.
Now that J&T INDUSTRY CO.,LTD. has become a leader in the space and have been able to scale appropriately, we are ready to expand to other cities.
J&T INDUSTRY CO.,LTD. also has an extensive line of products as water pump.