Fluorine plastic magnetic drive pumps completely solve the disadvantages of the previous generation product

fluoroplastic magnetic drive pumps completely solve the disadvantages of the previous generation product

fluoroplastic magnetic drive pump is the application of the working principle of magnetic couplings in centrifugal pump of new products, the main materials are stainless steel, reinforced polypropylene, engineering plastics. Reasonable design, advanced technology, with whole sealing, no leakage, corrosion resistance, the characteristics of fluorine plastic magnetic drive pump performance reach the advanced level of similar foreign products. With static seal instead of dynamic seal, magnetic pump flow components of pump in a completely sealed state, fluorine plastic magnetic drive pumps completely solve the other pump mechanical seal of the inevitable run, run, drip ills. Magnetic pump selection of corrosion resistance, high strength engineering plastic that can be used to make material such as jade ceramic, steel, stainless steel, so it has good corrosion resistance, and can make the medium to be delivered from pollution.

a, fluorine plastic magnetic drive pump use scope:

fluoroplastic magnetic drive pump compact structure, beautiful shape, small volume, low noise, reliable operation, easy to use longitudinal. Fluorine plastic magnetic drive pump can be widely used in chemical, pharmaceutical, oil, electroplating, food, photographic film developing, scientific research institutions, defense industry pumping units such as acid, alkali, oil, rare precious liquid, venom, volatile liquid, and circulating water to form a complete set of equipment, filter machine. Fluorine plastic magnetic drive pump is especially easy to leak, flammable, explosive liquid pumping, select the pump is more ideal.

2, fluorine plastic magnetic drive water pump installation and debugging:

( A) High temperature magnetic water pump should be installed. Check the cooling box of the lubricating oil before driving. If the oil level is too low, shall timely added. Before the pump. Should first open the cooling water circuit. Inlet pipe opening of the valve should be according to the pump work normally after adjusted the temperature of the cooling outlet pipe.

( 2) When the suction liquid level high Yu Guo axis. Fluorine plastic magnetic drive pump before starting to open suction pipe valves. If the suction liquid level below the pump axis. Pipe should be equipped with a bottom valve.

( 3) should be checked before use. Motor blades rotating flexible. No jam and abnormal sound. All fasteners are to tighten.

( 4) Fluorine plastic magnetic drive pump check whether the motor direction of rotation is consistent with the magnetic pump to tag.

( 5) After the motor start. Open the discharge valve slowly. After being pump into the normal working state. To switch to a needed discharge valve opening again. Before the pump stop working. Should first close the discharge valve. And then cut off power supply. To close the cooling water pipe valve.

3, fluorine plastic magnetic drive pump use note:

( A) For magnetic pump cooling and lubrication of the bearing is established by medium to be delivered. So the absolute ban on idling. And fluorine plastic magnetic drive pumps to avoid blackouts in the middle of the work is started again after space-time caused by plant operation.

( 2) In the medium to be delivered, if containing solid particles, the pump inlet to add filter: such as containing ferromagnetic particles, need to add magnetic filter.

( 3) Be transported medium and its temperature should be within the scope of the pump material allow a. The use of fluorine plastic magnetic drive pump temperature < 280 ℃, the maximum working pressure 1. 6 mpa, the density is not greater than 1840 kg/m3, the viscosity is not greater than 30 cm2 / S does not contain the liquid of hard particles and stand dimension. Special conditions should be strictly in accordance with the contract agreement.

( 4) Fluorine plastic magnetic drive water pump for conveying liquid product of medium for easy to precipitate, the after use should be cleaned in time, definite in the row of net pump fluid.

( 5) Magnetic pump normal operation after 1000 hours. Should overhaul bearing and end ring mo loss situation, and should not be with the loss of a replacement.