Water ring vacuum pump operation mode in different seasons and different water temperature

in different seasons in many ways, Such as temperature and humidity) Showed very different, so using the impact of water ring vacuum pumps are different. Especially in terms of temperature, if the temperature is too high or too low, the operation of the vacuum pump will have some change, some changes may not be too big, but enough to improve the work efficiency of vacuum pump. Gradually reduced. Factors affecting vacuum pump use more, the water temperature is one of the factors. When the water temperature too high or too low, will be bad influence on the working efficiency of the pump, even will shorten the service life of pump.

water ring vacuum pump operation mode of different season

1, the cold season.

all or most of the unit in heating mode. Water ring vacuum pump to absorb the heat water ring road, supplement the heat loss of the room, auxiliary heating equipment began to supplement water ring road of calories, and close the cooling device.

2, hot season.

all or most of the unit in a cooling mode. Water ring vacuum pump will indoor heat transfer to the water ring road. In the closed auxiliary heating device at the same time, the radiator began to decrease the temperature of circulating water.

3, transition season.

with refrigeration and heating requirements in buildings, the energy can be transferred within buildings. When balance, no need for activation water ring vacuum pump cooling device and auxiliary heating equipment.

water ring vacuum pump to the requirement of water temperature

1, because the water temperature of water ring vacuum pump is related with inhaled, so high fluid temperature, and reduced the volume of gas. Work also increased with the increase of evaporation increased, occupy the original displacement, reduced the suction, this will prolong vacuum. In addition, under the condition of vacuum, seal liquid evaporation will also increase. Increases, the percentage of possession, the greater the won't be able to solve this situation. As for involving data too much, under a variety of vacuum sealing liquid evaporation and at each temperature of evaporation is different, so we can not give specific data. Only under a certain vacuum degree, temperature change can be reflected, and evaporation. Change. When used, must be combined with the temperature, two performance curve of vacuum performance and pump performance curve.

2, water temperature is too high will inevitably evaporates water vaporization, negative pressure conditions will worsen this evaporation evaporation, thus causing too much in water ring vacuum pump of the pump body of water vapor. In this way, the water ring vacuum pump will be inhaling too much water vapor in the process of suction, and rarely from external suction, resulting in low vacuum system. There are two main factors lead to the water temperature is too high. One is the water temperature is too high; Second, the water temperature is too high. The water temperature in the working process of the rise.

what has been discussed above, it can be seen that similar to some uncontrolled factors such as season, if we want to use water ring vacuum water pump is not affected, so we can only make some reasonable changes according to actual condition, as it is the mode of the vacuum pump in different seasons. Of course, we love with more equipment, it can also extend the service life of equipment and life cycle. The influence of water temperature of water ring vacuum pump is very large. If the water temperature is too high or too low, can produce adverse results. Therefore, in use process must strictly abide by the relevant standards and water temperature control at a certain level. In the range, it also has strict requirements for operators. Operators use the pump work, must master the safety operating technology.

As we have known for quite some time, the success of JT in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
For details on water pump, see J&T INDUSTRY CO.,LTD. at J&T INDUSTRY.
Further dialogue of JT between the approaches, the chapter concludes, could lead to actionable advice on more robust policies that drive both structural change and competitiveness upgrading.