Water ring vacuum pump _ material requirements and winding method

the choice of materials is the main factor to product performance and service life. This is usually the main reason for the difference between the same products. Therefore, the water ring vacuum pump material requirements are usually very high. Today, we will explain the material requirements of water ring vacuum pumps and winding method.

what are the requirements for water ring vacuum pump of the material?

1, must have enough mechanical strength and stiffness, to ensure that the shell can withstand greater pressure, and won't be deformation in the process of heating and baking.

2, chemistry stability is good. Water ring vacuum pump material should have strong resistance to oxidation and corrosion resistance, and not with the working medium in the vacuum water pump and the vent in the process of reaction.

3, in the working temperature and baking temperature, the saturation vapor pressure is low enough.

4, good thermal stability. Good work in the system of the whole temperature range of vacuum and mechanical properties.

5, vacuum container equipment should work in vacuum and temperature to keep good work performance.

6, on the other hand, water ring vacuum pump material should have good ductility, cutting and welding performance, and can be easily processed into complex shapes.

7, good air tightness. In the process of work should be kept in the high vacuum environment, and must not wall material with porous structure, cracks or other form of the leakage defects, and permeability and degassing rate should be lower.

the above is the material requirement of water ring vacuum pump. Water ring pump equipment material requirements higher, or because it is working under high vacuum, special environment, so the application area is suitable for various working equipment. The performance requirement is high also, so in the process of production, must be seriously in the work.

winding method of water ring vacuum pump is what?

1, the scattered round copper wire winding. Due to the simple structure of the water ring vacuum pump and the winding process, winding process is very complicated. Scattered off the winding end short, the use of copper, small resistance and leakage resistance; Have scattered off half open groove is relatively small, which is beneficial to reduce the tooth harmonic amplitude, balanced air-gap magnetic field, improve the performance of submersible pump, lower temperature and higher output. Winding and half open slot or a half open slot matching.

2, forming windings. Water ring vacuum pumps forming usually winding flat wire winding. After a rise, forming, repression and insulation after processing, a flat wire cross-sectional area of Φ 1. 5Φ1。 6 round wire cross-sectional area is much bigger, so the number of parallel winding conductor is much less, wire insulation layer of the groove area does less; The area of the flat wire four rounded corners than round wire multiple rounded area is large. Four corners of the area is small, the filling coefficient of groove.

the above water ring vacuum pump of the two methods in detail. Specific winding is actually refers to a set number of turns of the circuit, its composition corresponds to by a voltage transformer tag. In the process of actual use, it is necessary according to the usage of equipment and the surrounding environment to choose the appropriate method.

As a entrepreneur, being trapped in a company under multiple quality problems never appealed to J&T INDUSTRY CO.,LTD..
go to J&T INDUSTRY to get an amazing offer at favorbale price. the water pump winter cover pump actually works and is worth a try.
Through our distribution and marketing competencies, J&T INDUSTRY CO.,LTD. provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the water pump company of choice.
water pump has a great positive reflects from our dear customers.
water pump has its grasp on oversees market also and has a very good repute.