Speck and common problems - vacuum pump maintenance

speck vacuum pump is attributable to the skeleton seal screw built-in mechanical vacuum pump equipment, maintenance inspection at ordinary times to observe the pump oil color, the content of the inquiry of oil, check inlet and outlet of the filter unit. Vacuum pump mechanical failure is oil leakage, no can do limit vacuum value and can't start. Judgment after the common faults, vacuum pump maintenance way is changing embrittlement of sealing components, plus and changing a new oil, clean fuel pipe, changing embrittlement of oil distribution device, rotary vane and huang, changing a damaged components and motor electromagnetic coil switch power supply, etc. Finally it concluded that the performance of vacuum pump upgrading parts and the way. Bottom web editor will give everyone in detail under the speck vacuum pump maintenance and common problems, look forward to all of you here have some help.

speck rotary-vane vacuum pump is one of the general vacuum pump to the anatomy laboratory in our country, generally sell as the ultrafiltration device in the front of the vacuum pump, as gas phase chromatograph, vacuum pump and the other the ultrafiltration device, is widely used in microbiology, medicine, forensic identification, petrochemical industry, agriculture and forestry, biological sciences, aerospace and other industries. Speck rotary-vane vacuum pump with its excellent performance by the customer's favor. But, with the use time of ascension, and some of the artifacts appear embrittlement, damaged or destroyed, the performance degradation and all can not run normally, harm, this time must be for vacuum pump maintenance.

speck vacuum pump maintenance and common problems

1, the inspection maintenance:

to increase the vacuum pump and there is no problem to go to work time, could the should to speck rotary-vane vacuum pump to carry out inspection maintenance at ordinary times, proposed to carry out regular maintenance maintenance, in the table maintenance frequency can be adjusted according to working experience in maintenance to carry out the moderate. Check the oil pump oil pump, before starting to the inspection of oil from the oil is thus and above the 'MIN' engraved line, can only do this part, vacuum pump can be normal operation of all.

2, observe the pump oil color:

should be within the oil window on time observe the color, the oil pump oil should be clear and transparent, coke light yellow, if find pump oil rub off or appear muddy, should immediately changing pump oil, otherwise can endanger the life of vacuum pump and vacuum packaging the actual effect, proposed application speck vacuum pump oil. 15 min proposed that when drainage pump operation, make the oil pump warming, for oil pump discharge.

3, check the air inlet:

the outlet of the filter unit or trap filter devices are installed when the air inlet and air outlet or trap, such as capture tank, dust filter, dry manic trap, trap organic chemistry, oil mist filter, etc, should be regular maintenance, to ensure the air inlet and the outlet flow. Air inlet or the outlet obstruction, very easy to cause the vacuum, vacuum pump and its system software is more serious, can cause inside the vacuum pump working pressure increases, this will also damaged seal and auto fuel tank dehiscence, physics damage.