Some of the techniques - vacuum pump maintenance

do you know about the vacuum pump maintenance? The following is a vacuum pump maintenance tips:

1, regularly check the oil level position, does not conform to the rules must be adjusted to conform to the requirements. Operation of the vacuum water pump, oil level should be at the center of the oil standard shall prevail.

2, oil change period should be used by the user according to the actual situation and whether meet the performance requirements to decide on their own. A new type of vacuum pump for general, it is recommended to clean and dry gas, once every 100 hours to replace oil. In oil can't see the black metal powder, may extend the oil change period.

3, regularly check the oil situation, found that oil deterioration new oil should be replaced in a timely manner, to ensure the normal operation of the vacuum pump.

4。 In the first month of operation, vacuum pump oil change after 100 hours, and then once every 500 hours.

5。 Under normal circumstances, vacuum pump should be in operation after 2000 hours overhaul, to check up on the aging of rubber seal, check whether the exhaust valve piece is broken, and clear the deposition of dirt on the valve and exhaust valve seat. Clean indoor all the vacuum water pump parts, such as rotor, rotor, spring, etc. Usually, it wash and dry with gasoline. Rubber parts after cleaning, dry with dry cloth. When cleaning and assembly, handle with care, handle with care and avoid collisions.

6, add bearing lubricant to the bearing body, observe the oil level should be in the center line of the oil standard, lubricating oil should be timely replacement or supplement.

7, check the vacuum pump pipe and joint have loose phenomenon. Turn the vacuum pump with the hand, to see if it was flexible.

8, after reassembling, should carry on the trial run. General should run 2 hours, the oil change twice. Due to the vacuum pump in the cleaning process will have a certain amount of volatile substances, normal operation should be put into normal operation.

9, start the motor, when the vacuum pump running, open the outlet pressure gauge and vacuum pump, according to the appropriate pressure display, gradually open the gate valve, check the motor load at the same time.

10, as far as possible to control the vacuum water pump capacity and head panels indicate range, to ensure that the vacuum pump running at peak efficiency, to achieve maximum energy saving effect.

11, vacuum pump to stop using, first close the gate valve, pressure gauge, then stop the motor.

12, during the running of pump, bearing temperature shall not exceed the ambient temperature 35, the highest temperature should not exceed 80.

13, vacuum pump in the first months of work, 100 hours after the oil change, every 500 hours, in oil at a time.

14, regularly adjust gland, ensure that the packing chamber leak is normal ( Advice in the form of droplets leaks) 。 Regularly check the wear condition of shaft sleeve, wear a big change in time.

15, when the vacuum pump stops working for a long time after maintenance, must be completely sealed pump, dry water, covered with grease for rotating parts and joints and safekeeping. When the vacuum pump used in cold winter, a drain valve at the bottom of the pump body should be in an open position.

There is a strong need for more research on , in order to be able to provide strong and conclusive evidence of their pool cover drain pump effects. However, recent studies have provided valuable insights into how the intake of may result in improved winter cover pump.
With all the pros and cons of different in mind, click J&T INDUSTRY to learn more about and decide which water pump option is best for your case.
We focus on operational procedure and manufacturing facilities of water pump.
pool cover drain pump water pump may be adapted for use at any winter cover pump and is suitable for pool cover drain pump.