Oil-free vacuum pump in use process should pay attention to what matters _

oil-free vacuum pump is usually used for cleaning and hygiene environment, such as laboratory, food vacuum compression, etc. But what matters for attention in use process, take a look at!

1。 Should have adequate ventilation conditions, and the environmental temperature should be lower than 40 ° C.

2。 Clean the dust.

3。 Water, oil and other liquid will fall into the pump.

4。 Don't direct exposure to the sun.

5, there is enough space around the pump in order to facilitate inspection, maintenance and assembly and disassembly.

6。 The pump must be installed on a flat surface.

7。 It is best to pump is installed on the concrete base. If there are no conditions, the pump can be firmly installed in steel or wood frame.

8, must ensure that the pump will not caused by foundation unstable vibration.

9。 Connected to the pump pipe should not be too long and less than the pump inlet diameter, lest affect pump speed. In addition, check whether the vacuum connecting pipe leaks.

10。 Connecting wires, please pay attention to the motor wiring requirements stipulated in the nameplate. Three-phase electric pump should pay attention to direction of rotation of the motor, it shall conform to the pump in the direction indicated by an arrow.

it has a simple structure, easy operation, convenient maintenance, the advantages of no pollution to the environment. Oil-free vacuum pump has good durability, is a kind of vacuum, compression, and vacuum pump. It is widely used to obtain the vacuum of the basic equipment.

compared with oil-free vacuum pumps, oil-free vacuum water pump vacuum degree is low, swept volume is small, but the structure is compact, easy installation, simple maintenance, mobile convenience, do not produce ash, polluting the environment, especially in the more demanding in the laboratory. It is also one of commonly used equipment in the laboratory.

so, when buying oil-free vacuum pump, first of all want to make sure that the vacuum degree necessary for the work. If the demand is very high, the choice of the vacuum pump shall be higher than the vacuum degree required. Otherwise, will not be able to meet the vacuum requirement. Work requirements. The second is the extraction rate of oil-free vacuum pump, the model selection of the slightly higher than the rate of extraction, this can better meet the demand. Finally, check out whether the corrosive gas, corrosive gas corrosion pump, must use special materials to meet the demand.

Most people who see a in operation for the first time are amazed at how well the pool cover drain pump is managed.
J&T INDUSTRY CO.,LTD. works hard to enhance continuously our reputation for accessibility, professionalism, performance, and the depth and quality of our long-term consultative relationships with clients.
J&T INDUSTRY CO.,LTD. can assure you that we never compromise on our quality standards and are one of the best in the market at present.