Just to create the best lamps.

J&T  >  AI - Page Sitemap  >  New recirculation w12gr10 garden irrigation for water transfer
New recirculation w12gr10 garden irrigation for water transfer

New recirculation w12gr10 garden irrigation for water transfer
  • New recirculation w12gr10 garden irrigation for water transfer
  • New recirculation w12gr10 garden irrigation for water transfer
  • New recirculation w12gr10 garden irrigation for water transfer
  • New recirculation w12gr10 garden irrigation for water transfer

New recirculation w12gr10 garden irrigation for water transfer

The law of heat conduction theory has been adopted in the developing of JT . It's specially made to allow the heat to be transferred from the higher temperature region to the lower temperature region.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:

New recirculation w12gr10 garden irrigation for water transfer-1

PUMP INSTALLATION AND APPLICATIONS

Product Features/ Safer pump body / Energy Saving / Simple structure /

Easy to operate / With thermal protector / High efficiency , low noise .

Product Applications/ Floor water booster / Hot water circulation system

of floor heating or boiler / Water circulation system of solar energy or heat pump .





Product parameters







Model

Power Q.MAH.MAX  Inlet/OutletG.W.       Kg
W L/min m
WRS20/13024852131”5
200
150
WRS25/13024860131 1/2”5.2
200
150
220-240V/50HZ,110V/60HZ, models are available on request




PUMP


. pump body: Cast iron/Brass/ Stainless steel

. impeller: Engineering plastic

. Shaft: Ceramic/ Stainless steel

. Bearing base: Stainless steel

. Bearing: Ceramic/ Baptist antimony graphite

. Shield cover: Stainless steel

Max system pressure 1.0MPa

Operational conditions : Ambient temperature : 0 ~40 ,

relative humidity 95% , water temperature range is 2 ~110 .

Keep ambient temperature lower than the water to avoid condensate in the stator .

Transmission fluid : The liquid which is clean , lean , non-corrosive ,

non-flammable / explosive and without any solid particles







New recirculation w12gr10 garden irrigation for water transfer-2

New recirculation w12gr10 garden irrigation for water transfer-3




Much advanced quality inspection equipment is used in JT production. It is finely handled by the coordinate measuring machine (CMM), caliper, microcaliper, gauge, and pass meter.
JT is developed with a deep investigation. Its air circulation part, materials and layout of the interface with the device are all seriously considered by the R&D team.
JT is the outcome of combined theories. It is developed adopting the knowledge of heat convection, radiation, and conduction by the R&D department.
During the production of JT , the accuracy of machining and grinding, surface roughness, concentricity, and verticality are all strictly scrutinized to guarantee high quality.
Several key considerations for designing JT have taken into account, including heat resistance, fin arrangement, location of fins, fin efficiency, thermal interface materials, etc.
The product is corrosion resistant. Its materials will form a layer of oxidation film which features toughness and high density after an electrical process.
Chat Online
Chat Online
Chat Online inputting...
Sign in with: