Md mine drainage pump short term storage and long term storage processing method
by：J&T
2020-07-22
MD mine drainage water pump is in extensive absorption of similar products at home and abroad on the basis of advanced technology, innovation, development of a new generation of high efficiency and energy saving of multistage water pump products.
This series of products used for conveying water or physical and chemical properties similar to water other liquid.
Mine drainage pump adopts corrosion or wear resistant material, may transport industrial waste water, sea water or water containing a small amount of particles.
Widely used in steel, petrochemical, power, mining and other industrial and mining enterprises of cooling circulating water system, water supply and drainage system, or can also be applied to urban tap water, circulating water heating system and farmland irrigation and drainage of water conservancy projects, etc.
MD mine drainage pump short-term storage: if stored in less than three months to pump installation, please handle according to the following instruction:
Many of us have heard about submersible pump and seen some of these units in operation in winter cover pump, pool cover drain pump and winter cover pump spaces.
Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is submersible pump, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.
Did I make the right decision? Am I saving money? Would I do it this way again? Yes, yes and yes if you choose to visit J&T INDUSTRY and make your enquiry.
What J&T INDUSTRY CO.,LTD. discovered was that innovation occurs when business models match up with one or more of the submersible pump where technological advances overlap with market needs, thus resulting in growth and transformation.
the DP/MDP mine drainage pump in a dry place, make appropriate protection to prevent dust and corrosion.
before the installation can't opened the package.
if there is no lubricating oil/grease bearing box, you must note on the lubricating oil/grease in order to prevent the corrosion of the bearing.
every two weeks, turn the water pump shaft by hand to prevent damage of shaft bearing component at a time.
MD mine drainage pump long-term storage:
if the storage period of more than three months before the pump installation, please handle according to the following instruction:
the DP/MDP mine drainage pump in a dry place, do the appropriate protection to prevent dust and corrosion.
should avoid damage, the lock in the security of the warehouse.
drain all liquid within DP/MDP mine drainage pump.
every two weeks, turn the pump shaft by hand to prevent damage of shaft bearing component at a time.
if the DP/MDP multistage centrifugal pump with gray cast iron casings and stuffing box packing, open the packaging line, packing box on antirust cream should be applied.
if there is no lubricating oil/grease, bearing box must note oil in order to prevent the corrosion of the bearing.
Many of us have heard about submersible pump and seen some of these units in operation in winter cover pump, pool cover drain pump and winter cover pump spaces.
Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is submersible pump, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.
Did I make the right decision? Am I saving money? Would I do it this way again? Yes, yes and yes if you choose to visit J&T INDUSTRY and make your enquiry.
What J&T INDUSTRY CO.,LTD. discovered was that innovation occurs when business models match up with one or more of the submersible pump where technological advances overlap with market needs, thus resulting in growth and transformation.
