Magnetic pump is the installation considerations -

magnetic drive pump ( Referred to as magnetic pump) Is a kind of the application of the working principle of magnetic couplings in centrifugal pump of new products. Reasonable design, advanced technology, complete seal, no leakage, no corrosion.

magnetic pump is widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, film printing, such as defence sector, by pumping flammable, explosive, poisonous, precious liquids. It has a wide range of sealing, no leakage and corrosion resistance. It is to create the leak-off, non-pollution of civilization is the ideal pump for the factory workshop and civilization.

when installing a magnetic pump should consider the following:

1. Put the equipment on the basis, put a wedge between the base plate and foundation, and then by adjusting the wedge to adjust the level of the pump. After adjustment, tighten the anchor bolts.

2。 Before installation should check the pump and motor, all parts should be intact. Magnetic pump should not be in the clutter.

3。 According to the basic size make concrete foundation, and embedded anchor bolts at the same time.

4。 Magnetic pump suction and discharge line should be a support, cannot be supported by magnetic water pump. The diameter of the inlet and outlet pipe should be consistent with the diameter of the entry and exit of water pump.

5。 After the installation is complete, the final turn the electromagnetic pump coupling with the hand, check whether there is friction.

6。 It is forbidden to magnetic pumps with particles of medium, and easy to crystallization. Don't allow continuous operation under the condition of the closed discharge, and should maintain a minimum flow.

7。 In order to prevent debris into the electromagnetic pump, filters should be installed at the entrance, the filter area should be larger than the cross-sectional area of the pipeline 3 to 4 times.

8。 When the medium viscosity is too high, the performance and power of the electromagnetic pump will be changed. For more information, please follow the instructions.

9。 Must ensure that the electromagnetic pump installation height is in line with the pump NPSH, and considering the losses in the pipeline and the temperature of the medium.

J&T INDUSTRY CO.,LTD. shows how effective market design can encourage participation, reduce gaming, and aggregate information, in order to improve liquidity, efficiency, and equity in markets.
Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is water pump, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.
An interesting website that contains directions (and recommends items) for water pump pool cover drain pump is J&T INDUSTRY. Find us on J&T INDUSTRY, your problem will be fixed.
The rising winter cover pump consciousness observed worldwide are expected to be key factors driving the demand for pool cover drain pump water pump.
J&T INDUSTRY CO.,LTD., which contributes itself on water pump for creating more useful application.