High-quality retrofit hot water recirculation system water high efficiency for fountain

Product parameters

Model	Power	Speed	Q.MA	H.MAX	Inlet/Outlet	G.W. Kg
Model	W	r/min	L/min	m	Inlet/Outlet	G.W. Kg
WRS25/4-180	72	2200	45	4	1 1/2”	3.1
WRS25/4-180	52	1900	38	3	1 1/2”
WRS32/4-180	36	1450	32	2	2”
WRS25/6-180	115	2410	55	6	1 1/2”	3.3
WRS25/6-180	91	2080	48	4	1 1/2”
WRS32/6-180	67	1680	36	3	2”
WRS25/7-180	151	2520	60	7	1 1/2”	3.8
WRS25/7-180	113	2220	50	5	1 1/2”
WRS32/7-180	81	1680	40	4	2”
220-240V/50HZ,110V/60HZ, models are available on request

PUMP

. pump body: Cast iron/Brass/ Stainless steel

. impeller: Engineering plastic

. Shaft: Ceramic/ Stainless steel

. Bearing base: Stainless steel

. Bearing: Ceramic/ Baptist antimony graphite

. Shield cover: Stainless steel

Max system pressure ≤1.0MPa

Operational conditions : Ambient temperature : 0 ℃ ~40 ℃ ,

relative humidity ≤95% , water temperature range is 2 ℃ ~110 ℃ .

Keep ambient temperature lower than the water to avoid condensate in the stator .

Transmission fluid : The liquid which is clean , lean , non-corrosive ,

non-flammable / explosive and without any solid particles

JT water retrofit hot water recirculation system high efficiency for fountain-2

JT water retrofit hot water recirculation system high efficiency for fountain-3

l******l

The advanced technology and sophisticated equipment give JT the fine workmanship. The product is very safe to operate

d******m

JT is superior in raw materials: inferior raw materials are totally rejected into the factory. And the high quality raw materials are well accepted though they will increase the cost of production. The product is provided with OED and OEM service

t******k

Relying on advanced technology, JT is finely manufactured according to the lean production method. The product is the fruit of continuous innovation and improvement

r******k

The design of JT is elaborately designed with the combination of functionality and aesthetics. The power supply of the product is super strong

i******a

The whole production of JT is carried out based on the requirement of lean production. Its working temperature will be automatically controlled within a normal range

e******z

J&T INDUSTRY CO.,LTD. There are stable raw material suppliers, stable supply of raw materials and low procurement costs, coupled with high degree of automation of production equipment, low consumption of energy, materials, and manpower in the production and processing process, and the final produced is excellent in overall cost performance.

Name

E-mail

Company Name

Content