Best 1.5 hp inground swimming pool pump irrigation factory for swimming pool

Product parameters

Model	P1（HP/KW）	QMAX (L/MIN)	HMAX(M)	Amps	Fitting size (mm)	weight (kgs)	Packing size (mm)
SUPB100	1.0HP/0.75kw	340	14.5	3.8	60.3or63	13.5	635275380
SUPB150	1.5HP/1.1kw	420	17	5.2	60.3or63	15.5	635275380
SUPB200	2.0HP/1.5kw	465	19	7	60.3or63	17.5	635275380
SUPB250	2.5HP/1.85kw	480	21	8.6	60.3or63	18.5	635275380
SUPB300	3.0HP/2.2kw	540	23	10	60.3or63	20	650275380
SUPA200-I	2.0HP/1.5kw	465	19	7	60.3or63	19.5	670275380
SUPA250-I	2.5HP/1.85kw	480	21	8.6	60.3or63	21	670275380
SUPA300-I	3.0HP/2.2kw	540	23	10	60.3or63	22.5	670275380
SUPA200-Ⅱ	3/8HP/0.35kw(low speed)	215	4.5	2.4	60.3or63	19.5	670275380
SUPA200-Ⅱ	2HP/1.5kw(hight speed)	465	19	7	60.3or63	19.5	670275380
SUPA250-Ⅱ	1/2HP/0.4kw(low speed)	230	5	2.8	60.3or63	21	670275380
SUPA250-Ⅱ	2.5HP/1.85kw(hight speed)	480	21	8.6	60.3or63	21	670275380
SUPA300-Ⅱ	5/8HP/0.45kw(low speed)	250	5.5	3	60.3or63	22.5	670275380
SUPA300-Ⅱ	3HP/2.2kw(hight speed)	540	23	10	60.3or63	22.5	670275380
220-240V/50HZ,110V/60HZ, models are available on request

FEATURES

1. The efficiency is improved 25% by the permanent magnetism,direct current, brushless, non-sensor motor.
2. Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved.
3. High technique products adopting MPPT and DSP chip technique.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft , motor body, screw.

PRODUCT FEATURES

① Thermal protector: single phase
② Insulation: F
③ Protection: IP55

Features

Thermal protector: single phase

Insulation: F

Protection: IP55

Working conditions

Medium temperature: 5-50℃

Environmental temperature: ≤50℃

Max.working pressure: 0.3MPa

JT irrigation 1.5 hp inground swimming pool pump factory for swimming pool-2

JT irrigation 1.5 hp inground swimming pool pump factory for swimming pool-3

JT irrigation 1.5 hp inground swimming pool pump factory for swimming pool-4

Product applications

JT irrigation 1.5 hp inground swimming pool pump factory for swimming pool-5

d******j

The materials or components used in JT are strictly selected by QC team. The selected materials or components have to be tested under professional devices or machines to check their reliability. The surface of our prototypes is smooth and flat

y******o

The materials of JT have been tested in order to eliminate any chemical composition that would contribute to negative health effects. The materials of our products include ABS, POM, PC, PA6, PA66, PMMA, aluminum, iron, steel, bake-lite, EVA and etc

a******p

The design of JT resorts to different technologies. Take its print circuit board as an example, it is designed using CAD, CAM, and light painting technology by the technicians. We have professional QC team to strictly control quality of our products

m******p

The production process of JT covers full quality inspection. It will be checked for CNC engraving, surface burnishing, polishing, and yellowing treating quality. The materials of our products include ABS, POM, PC, PA6, PA66, PMMA, aluminum, iron, steel, bake-lite, EVA and etc

x******q

JT is developed with complicated electrical or electronic technologies. CNC technology, the microelectronic technique, and sensor technology have been adopted into its development by mechanical engineers. With its own superb technology and efficient service, Tuowei hand model is well accepted at home and abroad

u******t

This product under strict quality control systems meets global standards. We have professional QC team to strictly control quality of our products

Name

E-mail

Company Name

Content