Custom sub pump repair submersible factory for mining enterprises

Latest products

Aquarium Class Heater (JRB-100) with Ce

UV-C Clarifiers (CUV-318) with Ce Approved

Underwater Light (CQD-135L) for Pond

Pond Lamp (CQD-202C) for Pond

Product Information
Feedback

JT Custom sub pump repair factory for mining enterprises-1

APPLICATIONS

l 1/3HP, 1/2HP, Single Phase 115V/60Hz, 3450 RPM

l Cast Iron Housing

l Thermoplastic Vortex Impeller

l 2“NPT Discharge Capable of Handling up to 2” Solids

l SJTW Power Cord with Length of 8ft.

l Replaceable Piggyback Tether Float Switch for Automatic Operation

l Permanent Split Capacitor Motor

Product parameters

Model	HP	GPH of Water @ Total Feet of Head
Model	HP	0 ft.	5 ft.	10 ft.	15 ft.	20 ft.
EF033	1/3	5000	4500	3400	1400	-
EF050	1/2	5500	5200	4000	1560	-

Pump & MOTOR

PUMP

◪ Max.immersion depth:5m
◪ Max.liquid temperature:+40℃
◪ Liquid pH value: 6.5-8

MOTOR

◪ Copper winding
◪ Built-in thermal protector
◪ Indulation class: F
◪ Protection class: IPX8

JT Custom sub pump repair factory for mining enterprises-2

o******l

Every production stage of JT is inspected by a specific QC team. From the raw materials grinding to vitrification and sintering, all these stages are conducted strictly according to the regulations of porcelain production.

v******m

JT has to go through the life cycle assessment regarding its whole service life. The assessment includes its properties of chemical, physical, energy impacts.

h******m

JT has to undergo a conformity assessment to demonstrate that it meets legal medical requirements to ensure it is safe and performs as intended.

g******b

The quality control of JT begins with the receipt of raw materials. These materials go through extensive QC procedures to ensure that the product is in compliance with the rubber and plastic industry regulation every time.

a******o

All raw materials of JT are well-selected from suppliers who are qualified in the sanitary ware industry and these materials are stringently tested by our QC team before production.

t******b

This product is characterized by good air circulation between the skin surface and the environment. Good ventilation at skin level and the possibility of eliminating the excess humidity generated through perspiration.

Name

E-mail

Company Name

Content