copper hot water recirculating pump for tankless water heater wrs254180 factory for water transfer

Product parameters

Model	Power	SPEED r/min	Q.MA	H.MAX	Inlet/Outlet	G.W. Kg
Model	W	SPEED r/min	L/min	m	Inlet/Outlet	G.W. Kg
WRS20/40-130	70	2200	40	4	1”	2.8
WRS20/40-130	50	1900	30	3	1”
WRS25/40-130	50	1900	30	3	1 1/2”
WRS25/40-130	35	1450	25	2	1 1/2”
WRS20/60-130	100	2410	45	6	1”	3
WRS20/60-130	70	2080	35	5	1”
WRS25/60-130	70	2080	35	5	1 1/2”
WRS25/60-130	55	1680	28	3.5	1 1/2”
WRS25/40-180&	70	2200	45	4	1 1/2”	3
WRS25/40-180&	50	1900	35	3	1 1/2”
WRS32/40-180	50	1900	35	3	2”
WRS32/40-180	35	1450	28	2	2”
WRS25/60-180	100	2410	55	6	1 1/2”	3.1
WRS25/60-180	70	2080	48	5	1 1/2”
WRS32/60-180	70	2080	48	5	2”
WRS32/60-180	55	1680	36	3.5	2”
WRS25/70-180	120	2520	55	7	1 1/2”	3.8
WRS25/70-180	92	2180	48	5	1 1/2”
WRS32/70-180	92	2180	48	5	2”
WRS32/70-180	66	1700	36	4	2”
WRS25/80-180	168	2520	55	8	1 1/2”	5
WRS25/80-180	113	2180	48	7	1 1/2”
WRS32/80-180	113	2180	48	7	2”
WRS32/80-180	81	1700	36	5	2”
220-240V/50HZ,110V/60HZ, models are available on request

PUMP

. pump body: Cast iron/Brass/ Stainless steel

. impeller: Engineering plastic

. Shaft: Ceramic/ Stainless steel

. Bearing base: Stainless steel

. Bearing: Ceramic/ Baptist antimony graphite

. Shield cover: Stainless steel

Max system pressure ≤1.0MPa

Operational conditions : Ambient temperature : 0 ℃ ~40 ℃ ,

relative humidity ≤95% , water temperature range is 2 ℃ ~110 ℃ .

Keep ambient temperature lower than the water to avoid condensate in the stator .

Transmission fluid : The liquid which is clean , lean , non-corrosive ,

non-flammable / explosive and without any solid particles

JT copper hot water recirculating pump for tankless water heater factory for water transfer-2

JT copper hot water recirculating pump for tankless water heater factory for water transfer-3

i******w

The design of JT starts with a sketch, then a tech pack or CAD drawing. It is completed by our designers who transform customers' ideas into reality. The product features high- and low-temperature resistance

u******o

The production process of JT is continuously inspected by our QC team to make sure that product quality is in line with garment standards and regulations. The product has a perfect insulating property

q******j

The fabric of JT is carefully chosen by our designers on the basis of fashion trends, quality, performance, and suitability. The electrolyte inside the product is not volatile, which contributes to relieving the pressure in the sealed environment

h******e

The production process of JT is strictly inspected to ensure that fabric width, length, and appearance comply with the garment standards and regulations. It can improve the power efficiency of electricity

e******l

The fabrics of JT has passed through the stretch test and it is proven to be qualified for proper elasticity. It's been proved that the ultra-high voltage can reach 750V

e******n

This product has good color fastness. It will not fade or begin to look ratty after prolonged exposure to the sun or being washed for a certain number of times. The product features high- and low-temperature resistance

Name

E-mail

Company Name

Content