GRC lightweight tablet production with roots vacuum pump, please? - - - - - -

Raw materials used in the

GRC lightweight tablet is basically alkali glass fiber and low alkali cement, which occupies a unique position in the building. This product mainly used as the ceiling, the part is used as the partition wallboard or external heat insulation material. GRC lightweight tablet makers want to GRC application technology is introduced into a new development stage, so we are looking for a new vacuum technology application solutions. After technical personnel studied the actual situation, draw the conclusion: the roots vacuum pump application in the GRC lightweight tablet, then small make up to introduce it to everyone.

roots vacuum pump in GRC lightweight plank applications, mainly is the vacuum dewatering process.

vacuum dehydration characteristics:

roots vacuum pump and dewatering device can ensure the suction cups on the wooden surface of extrusion effectively, which is beneficial to concrete dehydration. In addition, it also has the following characteristics:

( 1) Dewatering plate surface smoothness is good, because the filter cloth dehydration unit on the board, can pass the uniform distribution of vacuum pressure, so no cloth, board face no sag, smooth, comfortable, comfortable.

( 2) Dehydration speed, at the same time to take off the water can be more than doubled.

( 3) Because the vacuum evenly distributed, dehydration small resistance, GRC plate surface and edge even dehydration, dense and uniform product dehydration.

( 4) Work on the surface of the flexible sucker eliminates the fixed size of four edges of the seal edge, and can adapt to the changing of the panel size so as to achieve the aim of multifunctional suction cups.

( 5) Use filter hole is solved by using the use performance is good, and hard in the process of the filter cloth filter layer of various kinds of household dehydration devices were choked up with cement mortar.

( 6) Operation simple and convenient, save the installation process of filter cloth and rinsing process, one can do, can be rolled up at a time, in the province to save time can improve the working conditions.

roots vacuum pump principle:

roots pump works similar to the roots blower. Due to the continuous rotation of the rotor, pumping the gas from the air inlet are drawn into the space between the rotor and the pump shell where v0, then discharge through the vent port. Because where v0 space completely closed after suction, so that no gas is compressed in the pump chamber and expansion. But when the top of the rotor over the edge of the vent and where v0 space and exhaust side connected, because of the exhaust side pressure is higher, so part of the gas is returned to the space where v0, such pressure suddenly becomes higher. As the rotor continues to rotate, leave a gas water pump.

roots vacuum pump applications:

vacuum coating, vacuum brazing furnace, vacuum heat treatment furnace, large space simulation test, the light bulb manufacturing, laser manufacturing, vacuum packing equipment, automobile manufacturing, central vacuum systems, all kinds of chemical processing, vacuum degassing, vacuum degassing, vacuum dehydration, vacuum freeze drying, vacuum distillation.

light GRC plate adopts the roots vacuum pump vacuum dehydration, new stripping technology has the investment province ( Will die to reduce more than 60%) Horse speed, simple equipment advantages of easy operation, used in the production of new technology and new technology. Light of GRC plate has good compactness, bibulous rate is low, intensity is uniform, the characteristics of no. With the past than light GRC plate by direct injection molding process production, its strength can be increased by 10%. Above, bibulous rate is reduced by 5% or more, and reduce the material cost per square meter. Vacuum dehydration unit and instant demoulding vacuum cleaner application in light GRC plate to fill the blank in the lightweight GRC plate production equipment.

The single most important quality you'll need as J&T INDUSTRY CO.,LTD. is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability.
J&T INDUSTRY CO.,LTD. will provide branded products and services of superior quality and value that improve the lives of the world’s consumers.
Depending on the scale of the service, J&T INDUSTRY CO.,LTD. might also need to hire and manage an overseas workforce and comply with regulatory requirements.