Component analysis of gypsum slurry pump

gypsum slurry pump control: to ensure efficient operation of pump, we must adjust the gypsum slurry pump with former guard plate gap, adjust the gypsum slurry water pump clearance when the preferred pump stopped, loosen bolts pressure bearing box and loosen adjusting nut and bearing components to move forward, at the same time turn the shaft by hand according to the rotation direction of pump rotation, until the gypsum slurry pump and guard plate of friction, reoccupy adjustment bolt to make the rotor backwards, write down the movement before and after clearance, evenly distributed in the gypsum slurry pump between front and rear guard board, gypsum slurry water pump and former guard, guard after clearance between equal and dispatch two dust-proof plate tightly, fastening on the shaft. Must check it before starting again after adjustment of gypsum slurry pump rotation is normal, the bearing components hold-down bolts are tight, then start pump.

gypsum slurry pump parts:

in order to make the pump efficiency, must adjust gypsum slurry pump with former guard plate gap, adjust the gypsum slurry pump clearance to stop the pump first, loosen bolts pressure bearing box and loosen adjusting nut and bearing components to move forward, at the same time turn the shaft by hand according to the rotation direction of pump rotation, until the gypsum slurry pump and guard plate of friction, reoccupy adjustment bolt to make the rotor backwards, write down the movement before and after clearance, the average distribution in gypsum slurry pump between front and rear guard board, gypsum slurry pump and former guard, guard after clearance between equal. And dispatch two dust-proof plate tightly, fastening on the shaft. Adjusted again before starting to check whether the gypsum slurry pump rotation is normal, the bearing components hold-down bolts are tight, then start pump.

gypsum slurry pump bearings need lubrication:

gypsum slurry pump bearing components in the assembly, if the assembly is correct, suitable amount of lubricating oil, timely maintenance, transportation will be a long service life. So maintenance personnel should be regularly maintenance bearing components, check the status of bearings and lubricating oil, in the operation must be add or replace lubricating oil regularly, reasonable and timely add lubricating oil.

gypsum slurry pump maintenance is essential for stable and reliable operation.

pump types, wide variety, the market at present is suitable for heating water pumps are single-stage single-suction or single stage double suction vertical pipe pump, single stage single suction horizontal centrifugal pump, straight duplicate single suction horizontal centrifugal water pump, gypsum slurry pump and single stage double suction split volute centrifugal pump, etc.

In the office, various are considered essential since they are used to achieve particular tasks in the office. Among these , submersible pump, pool cover drain pump, and winter cover pump are widely used.
J&T INDUSTRY CO.,LTD. take prudent risks and work together to assure our success and profitability in the future.
J&T INDUSTRY CO.,LTD., which prides itself on submersible pump for applying in different ways.