A common fault and processing methods of titanium axial flow pump

titanium practice of axial flow water pump operation and traffic scheduling

titanium axial flow pump is generally not choose gateway scheduling total flow valve, common change scheduling channel guide vane pump impeller rotational speed ratio, or change the blade installation Angle is traffic scheduling.

1, variable speed than scheduling similar to the centrifugal water pump, titanium axial-flow water pump according to the change speed than several characteristic curves can be obtained, to job site adhere to in the high power area. Variable speed than the schedule due to its scheduled lunch already to gain more and more used in large and medium-sized titanium axial flow pump.

2, channel scheduling titanium axial flow guide vane diffuser can be set in the channel, according to the guide vane change the primary channel flow liquid to insist on the compressive strength of the pump characteristic curve changes. Guide vane traffic scheduling apply small scope changes and changes of pump head large category.

3, blade installation Angle of blade installation Angle of scheduling scheduling is equal to the change of the pump specific speed ratio, applicable rules change traffic large category and pump head change category smaller places.

titanium axial flow of common cause failure, summing up and processing

( 1) Winding down, want to be careful to maintain good core, prevent the silicon cocking, shift, tooth Angle groove burr, etc. The emergence of the scene. Good stitch process is: first use diagonal cutting pliers cut from the head end bolt circle.

( 2) To prevent or reduce open error caused the spinor back is not adjustable, before the assembled motor, and base on the before and after the end of commissure with a child playing on storage symbol, after finishing the as-is apart.

( 3) Handle the joints. Stripped of joint sheath and coating, remove the name of the copper wire lacquer layer and oxide layer; Still soldering and splicing, and the cutting edges, burrs and remove residual welding fluid, early with polyethylene tape or polyester adhesive tape and a half fold pack 2 layer as a mechanical maintenance.

( 4) According to the size of the must do die winding coil winding, in order to ensure the winding end toward the outer space and coil embedded groove.

( 5) Titanium apart when the axial flow pump dirty. The spinor back, and will lock nut and tighten. According to the intact status mount end cover, be careful not to damage the seal box of inner hole of rubber sealing ring, beating).

Look at the trends, both economic and consumer, for indications on your J&T INDUSTRY CO.,LTD.'s staying power.
There is always a question of how to pool cover drain pump, but have you ever thought about the price point? Go to J&T INDUSTRY to get cost effective offer.
Using high technology, submersible pump showed its competitive advantages, captioned with information about the company's commitment to providing safe, reliable, profitable jobs to local artisans.
Basically, you cannot have a winter cover pump without having the right submersible pump. Since you are going to use it regularly, be sure to invest in one that has a high quality.